or Join Now!
-- To surrender a dream leaves life as it is — and not as it could be.
home | projects | blog
1537 posts in 2047 days
Preview this project card
115613 posts in 3149 days
#1 posted 12-12-2012 11:03 PM
Looks very good from Here Jorge.
-- http://artisticwoodstudio.com Custom furniture
1718 posts in 1912 days
#2 posted 12-12-2012 11:12 PM
Very attractive. I do not understand the compound miters as the door is flat. Very nice though.
-- Thor and Odin are still the greatest of Gods.
#3 posted 12-12-2012 11:18 PM
The inside figure sticks out and the side are thicker on the inside than they are on the outside. Sort of going down hill… :-)
If you just cut the miter, you get a gap in the joint, you have to cut a compound miter, in this case 3º to the outside to get a perfect fit.
44 posts in 1576 days
#4 posted 12-13-2012 12:30 AM
Wow. Just, wow!
2235 posts in 2262 days
#5 posted 12-13-2012 01:27 AM
Nice tight miters JG.
What are the woods?
What did you do for finish?
Which way did you end up hinging or handing it?It kinda looks like its set up to swing out?
Its a beautiful door.
-- I don't drive a Prius.
2053 posts in 1760 days
#6 posted 12-13-2012 01:52 AM
Jorge, beautiful work. I’m in no way going to say it was easy. But I will say that I think I can do that. That’s a real important thing for me to say because that door is awesome. I’m adding this beauty to my favorites. If I’m lucky, we’ll have a similar one come this spring. Thank you very much for sharing!
-- Thanks for all the lessons!
#7 posted 12-13-2012 02:35 AM
Brandon, it is all stained and straight pine, finish is polyurethane with accelerator, it has a pivot point for swinging, it was too heavy to use regular hinges.
Mark, when I was told this was an easy door to make, my first thought was that it was not how easy or hard to make was, but how well the design fit with the existing house. I have no doubt you can make the door, if you are careful with the miters it is very simple, just remember to route a space smaller than the miters so that you can fit it all and have an overhang. Good luck with your door and if you need any help please do not hesitate to shoot me a PM.
679 posts in 2256 days
#8 posted 12-13-2012 02:36 AM
Beautiful door…Your ignorance is bliss comment reminded me of this saying—If ignorance is bliss, you’d think more people would be happier when you point out what morons they are.. LOL…
-- To realize our true destiny, we must be guided not by a myth from our past, but by a vision of our future
#9 posted 12-13-2012 02:45 AM
LOL, thanks for the laugh Bob. You are right, I told him, he got upset….. ;-)
23502 posts in 1910 days
#10 posted 12-13-2012 03:55 AM
Beautiful work. Stupid people will always exsist, you just have to ignore them.
-- Mother Nature created it, I just assemble it.
451 posts in 1650 days
#11 posted 12-13-2012 07:48 AM
That is one cool looking door. A lot of work went into it. Did you put the lockset on it already? Because I don’t see it. As for the buffoon who said it was easy, challenge him to make one just like it. That should shut him up.
3149 posts in 2583 days
#12 posted 12-13-2012 11:29 AM
The nice thing about a door is it has two sides. You on one and your buddy on the other. Fantastic job.
-- Dan, Naperville IL, I.G.N.
3389 posts in 1745 days
#13 posted 12-13-2012 09:00 PM
The design looks perfect.
-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics