LumberJocks

Dining and Poker Table

  • Advertise with us
Project by George Coles posted 12-08-2012 07:50 AM 1936 views 2 times favorited 12 comments Add to Favorites Watch

I was commissioned to make this piece as a Christmas present for the clients husband. The table is made from recycled Ipil. The chairs are also from recycled Ipil and saplungan for the arm rests. The cushions are from leather. Had to make it a six seater as the area could only accommodate a table of 1500 mm diameter. The foam used is memory foam and I must say that it is very comfortable.

-- George Coles, https://www.jarrahworks.com





12 comments so far

View HorizontalMike's profile

HorizontalMike

7755 posts in 2909 days


#1 posted 12-08-2012 12:30 PM

Wow! What a fantastic setup!

-- HorizontalMike -- "Woodpeckers understand..."

View BertFlores58's profile

BertFlores58

1698 posts in 2917 days


#2 posted 12-08-2012 12:58 PM

Really a fine detailed work. I like the velvet combined on the top. Someday, I will visit your workshop. You are just within my area too. Good to know you are also working with Philippine recycled wood.
Keep it going and enjoy the day.

-- Bert

View Monte Pittman's profile

Monte Pittman

29221 posts in 2333 days


#3 posted 12-08-2012 01:29 PM

You took beauty to a new level.

Awesome

-- Nature created it, I just assemble it.

View MontanaBob's profile

MontanaBob

830 posts in 2679 days


#4 posted 12-08-2012 02:01 PM

Outstanding….It looks like there is going to be some serious card playing going on…

View Dale 's profile

Dale

415 posts in 3176 days


#5 posted 12-08-2012 02:01 PM

Beautiful work George and recycled is a bonus. What finish did you use.

-- Dale West Central Pa. Do it all, before last call.

View MasterSergeant's profile

MasterSergeant

1362 posts in 2683 days


#6 posted 12-08-2012 02:35 PM

I looked at the beautiful pictures and all I could think of is WOW! Congratulations on your project!!!

-- Kelly, woodworker under construction

View Woodbridge's profile

Woodbridge

3545 posts in 2413 days


#7 posted 12-08-2012 03:14 PM

Beautiful work. I especially like the chairs. A wonderful design and the lighter coloured arm rests are a great design touch. They look so comfortable.

-- Peter, Woodbridge, Ontario

View Dusty56's profile

Dusty56

11819 posts in 3683 days


#8 posted 12-08-2012 03:43 PM

Incredible : )

-- I'm absolutely positive that I couldn't be more uncertain!

View a1Jim's profile

a1Jim

117090 posts in 3572 days


#9 posted 12-08-2012 05:40 PM

Theses turned out great George

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View cutworm's profile

cutworm

1075 posts in 2788 days


#10 posted 12-08-2012 07:34 PM

Awesome.

-- Steve - "Never Give Up"

View MonteCristo's profile

MonteCristo

2099 posts in 2183 days


#11 posted 12-08-2012 07:55 PM

Looks like a great dual purpose table and chairs, beautifully constructed.

-- Dwight - "Free legal advice available - contact Dewey, Cheetam & Howe""

View George Coles's profile

George Coles

183 posts in 2440 days


#12 posted 12-09-2012 05:16 AM

Hi. The finish on this project is two coats of sanding sealer followed by 3 coats of beeswax. The table took approximately 8 days and the chairs from design to finish about 24 days. The hard part about the chairs is all the sanding after the shaping. Thanks all for your comments they make a man feel humble.

-- George Coles, https://www.jarrahworks.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com