|Project by wood_maestro||posted 12-06-2012 07:28 PM||1064 views||4 times favorited||3 comments|
I made this tissue dispenser few months ago. Description:
SIZE about 5 inch X 5 inch
Material body made out of Ash Bottom made out of scrap Black Walnut
I used Trifern’s method of adding layers of water based dyes with couple of minor changes. After dye layers were put on, I used couple of layer of shellac to seal everything. Then I used water base wipe on Poly.
This dispenser uses 4 inch standard toilet tissue. The only difference is the dispensing method. For this to work I needed to remove the cardboard tube in the center of the roll, and start dispensing from the most inner layer of toilet tissue.
Thanks for looking
-- wood maestro....... Be Well, Do good work, and Stay in touch