or Join Now!
This was inspired from a couple of lumberjock members
Delayne Peck: http://lumberjocks.com/projects/71503and
David Bethune: http://lumberjocks.com/projects/14510
It works great when I remember I have one now. LOL
-- I have the Saw Dust Fever
home | projects | blog
235 posts in 1277 days
Preview this project card
table saw jig
17337 posts in 1674 days
#1 posted 11-16-2012 11:38 PM
I like your push block, but the links you posted return a “page not found” message.
-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?
397 posts in 1147 days
#2 posted 11-17-2012 12:14 AM
Same with me.
-- Ride hard or go home~
50 posts in 1036 days
#3 posted 11-17-2012 01:04 AM
http://home.cogeco.ca/~grip-n-rip/plans/Grip-N-Rip.pdfTry this link
-- cnarf, Ireland
663 posts in 2266 days
#4 posted 11-17-2012 01:10 AM
i recently bought one of the microjig grrrippers and to be honest i should have saved the money and just made something similar to this.
#5 posted 11-17-2012 10:42 AM
Sorry about the links maybe this will work better
719 posts in 1501 days
#6 posted 11-17-2012 10:49 AM
Correct links are:
Delayne Peck: http://lumberjocks.com/projects/71503
Bill, you forgot to leave a space between the link and the word “(Click”. Also I have pointed these links to the actual project rather than to the “widget” picture.
Oh, and that’s a nice pusher by the way – better than a quick hack job that I did a little while ago.
-- I may have lost my marbles, but I still have my love of woodworking
#7 posted 11-17-2012 10:58 AM
Thank you very much for your helpI wanted to be sure and give the proper credit
2451 posts in 1203 days
#8 posted 11-18-2012 10:47 PM
A very handy device.
I saw the GRR-Ripper some years ago, but stocks were not available in Australia.Northwood originally had them but it was reported the QLD Floods took the business out.
I then spent some time attempting to purchase them and eventually gave up on the local scene.
Not being too put off I went directly to Micro Jig and asked for the Aust distributor.Fail.
So I made my own crude versions just to see if they worked.
Construction Ply and structural flooring offcuts, handle the same, some non slip mat on the bottom with Contact adhesive held together with Kreg Screws.
-- Regards Robert
#9 posted 11-18-2012 11:50 PM
They do come in handy
6975 posts in 1913 days
#10 posted 12-02-2012 02:13 PM
I really need to make a pair of these, or at least something similar. Thanks for the DIY ideas.
-- HorizontalMike -- "Woodpeckers understand..."
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics