LumberJocks

Faith Plaques

  • Advertise with us
Project by scrollingmom posted 11-16-2012 08:48 PM 804 views 5 times favorited 6 comments Add to Favorites Watch

These plaques are done with Walnut backgrounds and Red Oak ply on front. They’re kind of cool because your carefully cut out the word Faith and you have two plaques that can be made. The one has a little more detail than the other, but they still look good. The little words cut out were such a pain to sand. I think I sanded away some of my fingernails holding them to the mop sander. Also had to be very careful how close they were held too. They are only 1/4” thick and 1/2” tall at tallest point. I mop sanded the little words because I wanted to soften them up a little.

The Walnut background is 3/4” thick and the Red Oak is 1/4” thick. I finished them with several light coats of spray laquer.

The pattern is by Deborah Nicholson out of the magazine Creative Woodworks and Crafts.

Thanks for looking and I love sharing.

-- Kelly, Allen,KS





6 comments so far

View HillbillyShooter's profile

HillbillyShooter

4614 posts in 950 days


#1 posted 11-16-2012 09:19 PM

Thank you for sharing—looks like the hits just keep coming. Very nice work, and I agree that sanding is tedious at best and it is definitely not my favorite part of wood working.

-- John C. -- "Firearms are second only to the Constitution in importance; they are the peoples' liberty's teeth." George Washington

View grizzman's profile

grizzman

7017 posts in 1962 days


#2 posted 11-16-2012 10:31 PM

well you have shared some home run projects with us that are wonderful, thanks for sharing your work, i really like the faith ones …but then there all really quite nice…

-- GRIZZMAN ...[''''']

View Jim Jakosh's profile

Jim Jakosh

11493 posts in 1764 days


#3 posted 11-17-2012 12:23 AM

That is so cool- a positive and negative image of the same word!!
That is neat that you can use the cut out from the first one to make the second one.!!............Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Woodenwizard's profile

Woodenwizard

1076 posts in 1713 days


#4 posted 11-17-2012 02:49 AM

Very nice.

-- John, Colorado's (Wooden Wizard)

View Roger's profile

Roger

14612 posts in 1462 days


#5 posted 11-17-2012 01:24 PM

Really like the wood combos, and super fine scrolling

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View dust4tears's profile

dust4tears

397 posts in 807 days


#6 posted 11-18-2012 07:37 PM

I want to make this~ Do you have any tips you learned that could help me when I tackle it? (I do have the mag pattern)

This looks great!

-- Ride hard or go home~

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase