Drill press table

  • Advertise with us
Project by stanleywc posted 05-07-2008 04:20 AM 2344 views 6 times favorited 11 comments Add to Favorites Watch

Here are a couple of shots of my drill press and its table.

-- Stan, South Carolina,

11 comments so far

View Dusty56's profile


11819 posts in 3689 days

#1 posted 05-07-2008 04:33 AM

Your own design ? damn , you have almost as many clamps as Norm !!!

-- I'm absolutely positive that I couldn't be more uncertain!

View Slacker's profile


178 posts in 3702 days

#2 posted 05-07-2008 04:46 AM

Coochiemama… that is phat!

-- Adapt, improvise, overcome

View Freddo's profile


85 posts in 3698 days

#3 posted 05-07-2008 05:11 AM

VERY nice! From a plan? I really need to get one of these built for my drill press. What is that mountd to the column?

-- God bless! Freddo (Northern - NJ) Our Creator designed us to create - so use WOOD!

View brunob's profile


2277 posts in 4170 days

#4 posted 05-07-2008 05:21 AM

I like it.

-- Bruce from Central New, if you'll pardon me, I have some sawdust to make.

View SteveKorz's profile


2134 posts in 3715 days

#5 posted 05-07-2008 05:24 AM

Nice!! I’m getting behind in my “to do” list… I see too many projects that I want to make!! Great job!

-- As iron sharpens iron, so one man sharpens another. (Proverbs 27:17) †

View GaryK's profile


10262 posts in 3989 days

#6 posted 05-07-2008 06:23 AM

That’s pretty nice. I have the same drill press and have been looking for ways to improve it.

-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX

View ND2ELK's profile


13495 posts in 3775 days

#7 posted 05-07-2008 06:30 AM

Very nice drill press table. It looks like it was made to last.

God Bless

-- Mc Bridge Cabinets, Iowa

View jjohn's profile


390 posts in 3714 days

#8 posted 05-07-2008 01:34 PM

My drill press sits under the work table. I have a smaller stand about 3’ tall. I like what you’ve done with yours.

-- JJohn

View RAH's profile


414 posts in 3878 days

#9 posted 05-07-2008 02:42 PM

I built this table for my press, I use it a lot and like it. Feels much safer to clamp your wood down when using forstner bits. I have 4 inch cut outs below the bits that are interchangeable with pre drilled holes for drum sander or forstner bits. Have fun with it.

Looking at the pictures again yours has the cut outs also.

-- Ron Central, CA

View Kipster's profile


1076 posts in 3754 days

#10 posted 05-08-2008 03:03 AM

I could use a table enhancement like yours . More detail would be much appreciated.

-- Kip Northern Illinois ( If you don't know where your goin any road will take you there) George Harrison

View Scott Bryan's profile

Scott Bryan

27250 posts in 3823 days

#11 posted 05-08-2008 09:21 AM

This is a nice table. I have been meaning to upgrade mine and this one gives me some ideas.

Thanks for the post.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics