Project by WoodenFrog | posted 11-13-2012 05:55 PM | 2634 views | 1 time favorited | 8 comments | ![]() |
![]() |
Wooden ring made from Purpleheart and Wenge veneer, this is a lamination style not a bentwood.
Here’s a Link to a blog about the Lamination Style Wearable Wooden Rings I make!
http://lumberjocks.com/WoodenFrog/blog/34552
-- Robert B. Sabina, Ohio..... http://www.etsy.com/shop/WoodenfrogWoodenProd
8 comments so far
Jim Jakosh
home | projects | blog
20301 posts in 3072 days
#1 posted 11-13-2012 06:46 PM
Really neat ring!!!!!!!!!!
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!
Monte Pittman
home | projects | blog
28946 posts in 2304 days
#2 posted 11-13-2012 07:18 PM
This is my favorite of these 3
-- Mother Nature created it, I just assemble it.
WoodenFrog
home | projects | blog
2737 posts in 2880 days
#3 posted 11-13-2012 07:24 PM
Thanks Jim, Thanks Monte!
These three where all made to show one person not sure which one she will like and want!
-- Robert B. Sabina, Ohio..... http://www.etsy.com/shop/WoodenfrogWoodenProd
Fishinbo
home | projects | blog
11362 posts in 2142 days
#4 posted 11-13-2012 08:29 PM
I like it a lot. Perfect color for it.
Roger
home | projects | blog
20923 posts in 2770 days
#5 posted 11-24-2012 01:11 AM
This and all of your other rings are incredible!! Very very “hip” and unique. How in the world do you size them?? thnx in advance.
-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com
WoodenFrog
home | projects | blog
2737 posts in 2880 days
#6 posted 11-24-2012 03:51 AM
Thank you so much Roger, I size them by eyeing it a lot and do a little at a time. I don’t have a ring mandrel yet but I have paper sizer’s that I printed off the net. I kinda just lay the ring on the paper on the right size I want and sand until it gets to that size.
Thanks again.
-- Robert B. Sabina, Ohio..... http://www.etsy.com/shop/WoodenfrogWoodenProd
that1wood
home | projects | blog
60 posts in 2240 days
#7 posted 01-18-2013 05:39 AM
This is an awesome ring! There’s a decent ring mandrel I found that most craft stores carry and it’s not very expensive. Or I used to measure outer diameters of sockets and find one close to the size I was making. Great job on these rings WoodenFrog!
-- that WOOD be cool..... JL
WoodenFrog
home | projects | blog
2737 posts in 2880 days
#8 posted 01-19-2013 09:52 PM
Thank you, 1Wood! I have been meaning to get a ring mandrel but never have.
I guess I am kinda lazy!
-- Robert B. Sabina, Ohio..... http://www.etsy.com/shop/WoodenfrogWoodenProd
Have your say...