|Project by Dick||posted 11-11-2012 04:34 PM||1144 views||0 times favorited||6 comments|
Ok so I finally got my lathe operating! I got an old Grizzly that had some issues. After replacing the pulleys and power switch, it seems to work pretty well. I’m really enjoying turning now. This is the first bowl off of it. This is Panga wood. It has these strange/peculiar light yellow spots randomly throughout the wood. This was not visible before turning and far more defined after sanding and finishing. It was also porous. I used some InLace I had for the turquoise rings (actually the color is Lacey). It’s finished with gloss lacquer. I took some pictures with and without flash. I can never seem to get the right light for a good picture.