Kitchen Cupboard Inserts Part 2

  • Advertise with us
Project by robscastle posted 11-10-2012 07:27 AM 2089 views 7 times favorited 6 comments Add to Favorites Watch

After making the Inserts for the corner cupboard I decided to do the under sink area as well

The upper shelf is for all the usual cleaners and “stuff” stashed under the sink.
The lower level is vegie storage.

The right hand upper and lower inserts were made to go around all the plumbing for the sink, hence the appearance of “over complex construction.

The finish, well its now the second week since making the white ones for the pots and appliances in the corner cupboard and it still smells from the paint.

After receiving a comment from a fellow LJ regarding “sealing” as opposed to “priming” I decided to seal the MDF rather than prime it.

Well while they were sitting on the table drying Aurora commented that they looked better that way!

So being not one to complain left them sealed only. This reduced process time by at least 2 days while waiting for paint to dry. With the added result of no paint smell in the cupboard.

-- Regards Robert

6 comments so far

View Sergio's profile


468 posts in 2599 days

#1 posted 11-10-2012 12:31 PM

Clever ! (and well done)

-- - Greetings from Brazil - --

View SuburbanDon's profile


487 posts in 2900 days

#2 posted 11-10-2012 05:26 PM

Looks nice and reminds me that I have a couple of places in my kitchen where this could be done.

-- --- Measure twice, mis-cut, start over, repeat ---

View a1Jim's profile


116906 posts in 3483 days

#3 posted 11-10-2012 08:45 PM

Very creative and useful,nice job.

-- Custom furniture

View robscastle's profile


4787 posts in 2110 days

#4 posted 11-10-2012 09:08 PM

Thanks Guys,

Aurora asked my why I didn’t do it ages ago!
The reason being I didn’t think of it until I saw a haffele unit in my son’s new kitchen and wanted one.
When you open the door all the shelves moved along and out, very impressive.
However none were suitable for my setup, which I was very disappointed about and that set me thinking I will make my own, well almost, at least its better than the original problem of having to remove items individually to find something at the back!

-- Regards Robert

View kaerlighedsbamsen's profile


1239 posts in 1620 days

#5 posted 12-11-2013 08:24 AM

Super elegant solution around the plumbing. Mind if i borrow your idear?

-- "Do or Do not. There is no try." - Yoda

View robscastle's profile


4787 posts in 2110 days

#6 posted 12-11-2013 08:50 AM

I do not have any concerns if you want to copy the design, as long as you post your results!

-- Regards Robert

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics