OSB turnings

  • Advertise with us
Project by dean2336 posted 11-01-2012 09:18 PM 2759 views 0 times favorited 8 comments Add to Favorites Watch

some of my latest OSB turnings—sealed with brushed on laquer,sanded then a couple coats of poly sanded between coats. thank you.

-- dean2336,nebr.

8 comments so far

View Surfside's profile


3389 posts in 1261 days

#1 posted 11-01-2012 09:29 PM

Simple but attractive!

-- "someone has to be wounded for others to be saved, someone has to sacrifice for others to feel happiness, someone has to die so others could live"

View Fishinbo's profile


11362 posts in 1264 days

#2 posted 11-01-2012 09:33 PM

Awesome twins!

View MarkTheFiddler's profile


2013 posts in 1276 days

#3 posted 11-01-2012 09:43 PM

I just had to see these. Who would have thought!? That wider based vase rocks out loud!

-- Thanks for all the lessons!

View WoodGuyNC's profile


111 posts in 2055 days

#4 posted 11-01-2012 11:22 PM

Sort of adds a nice exotic wood look to them. I’ve done plywood, but haven’t tried the OSB yet, since I don’t have any on hand. But I will try it once I get some. Good job.

-- You can't buy salvation, it's a free gift from God.

View Ben's profile


273 posts in 2801 days

#5 posted 11-02-2012 12:26 AM

Wow. Thats a pretty cool technique. Do you treat the blanks before you turn them?

-- Do something nice for somebody

View Porchfish's profile


661 posts in 1620 days

#6 posted 11-02-2012 01:52 PM

Interesting, a silk purse from a sow’s ear ! Innovators are a grand breed of folks !

-- The pig caught under the fence is always the one doing all the squealing !

View Brandon's profile


4147 posts in 2039 days

#7 posted 11-02-2012 02:20 PM

Nicely done. OSB is dirt cheap, too! Do you sand or plane the OSB before laminating it? The kind I buy has a rough end on one side.

-- "hold fast to that which is good"

View dean2336's profile


224 posts in 1997 days

#8 posted 11-02-2012 04:24 PM

Ben i do nothing to the blanks before turning
Brandon i run the OSB through my sprial head planer, both sides laminate face to face,alot of tite bond two thanks for asking

-- dean2336,nebr.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics