|Project by OldKranky||posted 10-27-2012 12:08 AM||1307 views||4 times favorited||9 comments|
Yet another hall table from leftovers and castoffs….
Here is a photo spread from start to finish
Picked up some used spindles at the ReStore and sliced off the ends to get my legs.
Milled a few strips of beaded edge banding to apply to some plywood scraps for the apron.
Then I cut the aprons to size and attached the end aprons to the legs followed by the back apron using pocket hole screws.
For the front apron I cut out the openings for the drawers on the table saw by raising the blade through the plywood and then I applied some home made beading to the openings to dress them up a bit.
I then attached the front apron to the Legs.
Installed some simple drawer guides.
Built two simple drawers from some leftover pine boards.
Addeded an MDF top and a couple of Drawer fronts made from some pine boards and painted it with chalk paint toped with paste wax.
There you have it… a quick little weekend project.
Thanks for looking!
-- Better looking at it than for it....