| Project by dee2 | posted 209 days ago | 1094 views | 0 times favorited | 7 comments |  |
 |
Just had to try these. They are wenge and the silver is permanent marker. Am going to mount the eagle in the top of a box. Finish is satin spray lacquer. For those of you who carve…..you must have more patience than I do. These were fun to make, think I’ll try a rifle next!
-- Dee2, OH Aromatherapy....fresh cut wood!!
| Pin It |
7 comments so far
patron
home | projects | blog
12067 posts in 1511 days
#1 posted 209 days ago
well you did good i would say
i thought i was going to see a gun
in a box
then i just saw a gun
with a trigerguard
of wood
then the lights went on
great work
-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle
HalDougherty
home | projects | blog
1820 posts in 1407 days
#2 posted 209 days ago
Good job! Does the slide work? The first pistol Samuel Colt produced was carved from wood as a prototype.
Here's a link to the article where I found the photo.
-- Hal, Tennessee http://www.first285.com
Ken90712
home | projects | blog
12665 posts in 1359 days
#3 posted 209 days ago
Nice Job!
-- Ken, "Everyday above ground is a good day!"
jap
home | projects | blog
1032 posts in 224 days
#4 posted 209 days ago
nice, i thought it was a real gum at first!
-- Joel -- http://diversitywoodworks.wordpress.com
Roger
home | projects | blog
9191 posts in 974 days
#5 posted 209 days ago
Nicely carved. Also, thnx Hal for that link
-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net
LittlePaw
home | projects | blog
1500 posts in 1248 days
#6 posted 201 days ago
Careful where you point it, dee2. It might go bang!
-- Paul - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.
LittlePaw
home | projects | blog
1500 posts in 1248 days
#7 posted 201 days ago
Careful where you point it, dee2. It might go “BANG”! 8-}
-- Paul - The sweetest sound in my shop, next to Mozart, is what a hand plane makes slicing a ribbon.
Have your say...