LumberJocks

Another Adirondack Chair/Table

  • Advertise with us
Project by DonB posted 645 days ago 1043 views 0 times favorited 6 comments Add to Favorites Watch
Another Adirondack Chair/Table
Another Adirondack Chair/Table No picture No picture No picture No picture No picture
Zoom Pictures

Sanding and painting to come. Second chair completed in two days. Much less time when you can copy one rather than do it from scratch. Extra paint on all the feet all ready. Sprayed them the same pale yellow color as the feet. Used (not shown) treated 2×4s as runners to keep the feet off the wet, warm Florida ground.

-- DonB





6 comments so far

View AJswoodshop's profile

AJswoodshop

1057 posts in 881 days


#1 posted 645 days ago

Looks like you did a nice job!

-- If I can do it.....so can you! -AJswoodshop

View Ken90712's profile

Ken90712

14847 posts in 1793 days


#2 posted 645 days ago

Nice work, I have been meaning to make thses for so long they might go out of style. LOL

-- Ken, "Everyday above ground is a good day!"

View RussellAP's profile

RussellAP

2938 posts in 891 days


#3 posted 640 days ago

My first Adirondack was from the Popular Mechanics plan. I still have plans to make it lay back a bit, it’s too upright for comfort. I modified the design by adding 2×4 front legs and 2×6 arms, makes the whole thing more solid. From now on I think I’ll sink the back down under the seat so I can hide the screws. The uppers can be done from the back for a screwless design.

-- A positive attitude will take you much further than positive thinking ever will.

View RussellAP's profile

RussellAP

2938 posts in 891 days


#4 posted 640 days ago

Here is a tip I learned about making those back slats easier to assemble. When you cut the top brace, keep the piece you cut off, (you may need to cut it out of a 1×6 from now on).
Lay the chair on it’s back propped up to be level. Lay the back slats in place and take that piece you cut and put that on the top and clamp it to the upper back brace with the back slats in the middle. Now you can arrange them evenly and hold them down to attach them.

-- A positive attitude will take you much further than positive thinking ever will.

View DonB's profile

DonB

221 posts in 1297 days


#5 posted 639 days ago

RussellAP: Good idea on the top brace left over and clamping the back slats. I used a full length spacer which allowed me to clamp it that way, but I like your idea.

-- DonB

View NikkiLaRue's profile

NikkiLaRue

208 posts in 87 days


#6 posted 86 days ago

love them!

-- Nikki

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase