|Project by Drew - Rock-n H Woodshop||posted 10-22-2012 05:25 AM||2867 views||10 times favorited||5 comments|
I acquired a new “used” bandsaw that was head over heels what I originally had, but did not have the most important item, a fence.
I needed to resaw rails for my crib build so I needed a way to do that without having to push manually to adjust for the blade drift. Here is what I cam up with. It has a base that slides into the mitre slot and has a stop to center it on the table. Once you set for the depth and drift, just push it through and the stop will keep it from going forward. Works pretty well.
-- Drew -- "I cut it twice and it's still too short!"- Rock-n H Woodshop - Moore, OK