LumberJocks Woodworking Forum banner

Project Information



The Woodscrap Bin is complete in the shed. I finished it with two coats of feast watson clear statin varnish and wheeled it into the shed. So far so good and shed is a lot tidier for it. (There is extra-wood behind the bin in the photo.)



Bin 1 has offcuts of coastal black (including burls) and radiata pine.



Bin 2 has Tasmanian Mrytle (clear, figured & burls), silver ash, and silky oak. It also has some small pieces of huon pine, red gum, olive wood, ebony, purtle heart and blackwood.



Bin 3 is mostly Australian Red Cedar and some more blackbutt.



The back tray has some masonite, plywood, MDF and old templates from various projects.



Gallery

Comments

· Registered
Joined
·
37 Posts
Nice scrap bin. May I ask the dimensions and how many sheets of plywood it took?
 

· Registered
Joined
·
126 Posts
So the business I went to acquire the ply couldn't rip it for transport so my plan for ply ended.
What they did have was these re-dressed boards of radiata pine patchworked together.
Each was 1800×600x18mm. I bought four and cross cut one into 4. Easy.
 

· Registered
Joined
·
878 Posts
I spy some awersome burl in this here scrap bin!
 

· Registered
Joined
·
1 Posts
Great idea, I need to make one of these.
 

· Registered
Joined
·
1,433 Posts
I don't see any scrap there. it all looks like very usable wood to me.
 

· Registered
Joined
·
55 Posts
Not sure if I wanted to see your bin, or what wood you had in it…...But the bin looks great.
 
Top