| Project by empeg9000 | posted 245 days ago | 1661 views | 2 times favorited | 3 comments |  |
 |
I have needed to build an outfeed table for over a year. I also am tired of using my table saw as a workbench. I replaced my stairs last year with a new set of oak stairs. I saved as much of the lumber as I could from the old stairs. I decided to make an outfeed table using as much of that lumber as I could. THe lower stretcher is set low because I am planning to make some storage cabinets to go in there.
You can read my blog about building it here.
| Pin It |
3 comments so far
Monte Pittman
home | projects | blog
7209 posts in 535 days
#1 posted 245 days ago
Good save, great table
-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability
mloy365
home | projects | blog
305 posts in 1327 days
#2 posted 245 days ago
Very nice. Now I need to get started on one.
The tread mill against the wall is a nice touch!
-- Mike - Northern Upper Michigan
empeg9000
home | projects | blog
82 posts in 623 days
#3 posted 245 days ago
HAHA! Well mloy365 it is a shared basement so that was the best spot for the treadmill. That studded wall there in the pictures next to the pile of scraps is currently being sheet rocked. I hope to have that done by the end of next week so I can get back to doing some actual woodworking.
Have your say...