|Project by Kevin||posted 10-05-2012 01:43 PM||1802 views||3 times favorited||11 comments|
I recently made 4 pizza peels for a show I’m going too. This jig makes putting a bevel on the front edge very quick and easy. Using a belt sander works well too, but I thought I would post this incase anyone wanted to try it. I only have a bevel on the front edge, but it could easily be put on the sides too then just touch up the corners to match. But for these I only wanted a front bevel. The jig just rides on the rip fence. It has a dado in it to clear the bolts on my fence. Not much to it really just a piece of 2x planed down to the width of my fence, a big face board for clamping the pizza peel too and a board in the back. I put a coat of paste wax on all parts touching the fence so it slides nice. Last pic is one of the peels I just made. Thanks for looking.
-- Measure twice, cut once, then rout a whole bunch