LumberJocks

Kreg Jig Storage

  • Advertise with us
Project by JDoerr posted 10-03-2012 04:41 AM 4858 views 39 times favorited 17 comments Add to Favorites Watch

Well, I finally got some free time and decided to make this handy kreg jig storage. I have been wanting to make something like this for quite some time. My ideas and plans for the kreg storage came from combining other lumberjockers projects into what worked best for my needs. So, thanks everyone for your posts! This was a great project at a low cost. Only things I had to purchase were the locks and hinge, $8 total. Wood was made out of all scraps. Got to lot that!! It will be really nice to have all the parts and accessories for the kreg jig all in one spot.





17 comments so far

View a1Jim's profile

a1Jim

112296 posts in 2263 days


#1 posted 10-03-2012 05:24 AM

cool storage idea.

-- http://artisticwoodstudio.com Custom furniture

View bluekingfisher's profile

bluekingfisher

1053 posts in 1666 days


#2 posted 10-03-2012 08:02 AM

can’t fault it, been meaning to build one for myself, thanks for the inspiration

-- No one plans to fail, they just, just fail to plan

View Howie's profile

Howie

2656 posts in 1609 days


#3 posted 10-03-2012 10:57 AM

I built a box to hold mine,but I like yours idea better.Think I’ll build one like it. Good idea thanks for the tip.

-- Life is good.

View mloy365's profile

mloy365

434 posts in 1816 days


#4 posted 10-03-2012 12:14 PM

That is a great idea and design!

-- Mike - Northern Upper Michigan

View jerrells's profile

jerrells

854 posts in 1571 days


#5 posted 10-03-2012 12:26 PM

That is one nice design – I am sure to put that on my TO-DO list (the long TO-DO list).

-- Just learning the craft my Lord and Savior Jesus Christ practiced.

View Lee A. Jesberger's profile

Lee A. Jesberger

6663 posts in 2666 days


#6 posted 10-03-2012 01:09 PM

Nice job on this. Great design.

I tend to over do everthing. For example, I would have used edge banding on the plywood. Just because it would look , well, “finished”.

Also, as much as people love using the Kreg system, I just can’t get used to opening something, and seeing those very unprofessional looking pockets. I suppose if they were plugged, I wouldn’t mind them so much, but most projects I see here have the holes exposed.

Just my opinion.

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View ChesapeakeBob's profile

ChesapeakeBob

342 posts in 2169 days


#7 posted 10-03-2012 01:19 PM

Great looking storage project! “Form follows function!”

-- Chesapeake Bob, Southern Maryland

View Kookaburra's profile

Kookaburra

748 posts in 910 days


#8 posted 10-03-2012 01:33 PM

Ha! I am glad you used the pocket screws to join this :) Nice locker for all those parts that Kreg seems to require.

-- Kay - Just a girl who loves wood.

View knotheaded's profile

knotheaded

4 posts in 1041 days


#9 posted 10-03-2012 03:01 PM

Mind if I ask what model that jig is?

I’ve been trying to find the version that has the clamping handle on the “operator side” of the workpiece. Kreg even shows a picture of it on their website under the “jigs” catagory, but it isn’t shown as an available item in the listings. Do they not make this model any more?

Great looking storage solution! Thanks for posting.

View chickenguru's profile

chickenguru

41 posts in 1680 days


#10 posted 10-03-2012 05:05 PM

The model is a K3. Not sure if it’s still availiable though.

View cdaulton's profile

cdaulton

17 posts in 1154 days


#11 posted 10-03-2012 05:47 PM

Edtheengineer, not sure of the exact model name because I saw it marketed as a K3 and a K4 but I know that it is no longer available from Kreg. I talked to a Kreg rep at a woodworking show earlier this year and he said they don’t make them any more because they cost too much to make and they couldn’t sell them for even $10 more than the back mounted lever type. I have the front mounted lever type and have used the back type and the one with the lever in front is far easier to use.

View Greg72's profile

Greg72

55 posts in 798 days


#12 posted 10-03-2012 06:00 PM

Great Job! I will probably be stealing your idea.

View ducky911's profile

ducky911

228 posts in 1475 days


#13 posted 10-03-2012 07:52 PM

I like the handles on the side…just put it on a shelf when done…I have mine on a bench and can not use that area for other tasks…
? what are the plywwod scraps on the top for?

View cutworm's profile

cutworm

1065 posts in 1479 days


#14 posted 10-03-2012 11:08 PM

Very nice work!

-- Steve - "Never Give Up"

View Howie's profile

Howie

2656 posts in 1609 days


#15 posted 10-04-2012 11:39 AM

ducky, straps on top are supports

-- Life is good.

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase