OSB rolling pins

  • Advertise with us
Project by dean2336 posted 09-27-2012 07:47 PM 2182 views 3 times favorited 13 comments Add to Favorites Watch

here are two more projects out of with walnut handels the other has maple.alot of people think they are made of straw.thank you.

-- dean2336,nebr.

13 comments so far

View Gshepherd's profile


1727 posts in 2342 days

#1 posted 09-27-2012 07:52 PM

Those are lookin good…. You should do a build blog on these. The OSB has some neat designs to it one would not expect to see from it. How many pieces of OSB get thrown out that could be made into rolling pins?

-- What we do in life will Echo through Eternity........

View rmac's profile


217 posts in 3201 days

#2 posted 09-27-2012 07:54 PM

Very nice, just like the vases you showed earlier. I’m wondering along with everybody else what kind of finish you’re using on these.


-- My table saw laughs at hot dogs.

View Darell's profile


435 posts in 3735 days

#3 posted 09-27-2012 08:04 PM

Dean, I gotta tell ya, ya do great work with that stuff. I gave it a try after you posted your earlier projects and failed miserably. My biggest problems were heavy tear out and difficult to sand. Didn’t even make it to finishing. Would you post your process for us? Or, maybe you get a better grade of OSB that I do. :-)

-- Darell, Norman, Ok.

View StuffMadeFromWood's profile


17 posts in 2238 days

#4 posted 09-27-2012 08:23 PM

Very nice! Do you figure them to be functional or just decorative?

-- Russ, Wisconsin

View Monte Pittman's profile

Monte Pittman

29860 posts in 2479 days

#5 posted 09-27-2012 08:47 PM

Love the fact that you’re doing something I have never seen before. Gets the brain going in a whole new direction. I hope they are functional. You’ve created another item on many people’s bucket list.

-- Nature created it, I just assemble it.

View ohwoodeye's profile


2048 posts in 3294 days

#6 posted 09-27-2012 09:19 PM

Very nice looking. I would worry about using them unless they were 100% sealed somehow. Otherwise a massive bacteria trap in the gaps.

-- Directions are just the Manufacturer's "opinion" on how something should be assembled. ----Mike, Waukesha, WI

View Puffin's profile


22 posts in 2788 days

#7 posted 09-27-2012 09:24 PM

Outstanding. Just like the other vessels you turned. You never think OSB could look so good.

View a1Jim's profile


117229 posts in 3718 days

#8 posted 09-27-2012 11:10 PM

Unique for sure, Talk about beauty and the beast “OSB and walnut :))

-- wood crafting & woodworking classes

View Roger's profile


20948 posts in 2945 days

#9 posted 09-28-2012 12:43 PM

I woulda never thunk it. Ditto what a1Jim said. Wow!

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View bondogaposis's profile


4973 posts in 2492 days

#10 posted 09-28-2012 05:09 PM

Very innovative. How in the world do you fill the pores in OSB? Epoxy?

-- Bondo Gaposis

View steamfab's profile


76 posts in 2321 days

#11 posted 09-28-2012 08:51 PM

I love how it turned out beautifully!

View MonteCristo's profile


2099 posts in 2329 days

#12 posted 10-01-2012 02:23 AM

As they say in Newfoundland, that’s “some different” ! I’m wondering how hard the OSB is, as rolling pins are unually made of pretty hard wood.

-- Dwight - "Free legal advice available - contact Dewey, Cheetam & Howe""

View Tbarksdale's profile


22 posts in 2128 days

#13 posted 01-17-2013 07:37 PM

at work we throw away 3 yes 3 40 yard dumpsters a day of all kind of osb 7/16,15/32 23/32 flooring sanded i have enough to build a house and then some stored

-- Tbarksdale Cullman Alabama

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics