LumberJocks

homemade sleeves for JOVS-10

  • Advertise with us
Project by Rembo posted 09-23-2012 06:28 PM 2001 views 0 times favorited 7 comments Add to Favorites Watch

I’ve been thinking to buy this machine or not ..
I stopped by the price of sanding sleeves! I tried to make them myself, and eventually bought the machine.
yet it was a test, but I think they will work.





7 comments so far

View a1Jim's profile (online now)

a1Jim

112166 posts in 2243 days


#1 posted 09-23-2012 06:34 PM

Lt’s great to have a OSS when you need one ,I never thought ov making my own sanding sleeves.

-- http://artisticwoodstudio.com Custom furniture

View Rembo's profile

Rembo

408 posts in 1617 days


#2 posted 09-23-2012 06:39 PM

a1Jim,I do not want to give ten dollars for a piece of paper :)

View a1Jim's profile (online now)

a1Jim

112166 posts in 2243 days


#3 posted 09-23-2012 07:26 PM

Hi Rembo
I was not criticizing you making your own sleeves. in fact I think it’s pretty darn creative,like most of the things you do.
I don’t know were you would buy your sleeves but I don’t pay $10 for one sleeve unless it’s the largest ones .
I find they cost any where from $1.50 – $3. each
http://www.amazon.com/Porter-Cable-777502203-4-Inch-Spindle-Sanding/dp/B00004Z07B/ref=sr_1_11?s=hi&ie=UTF8&qid=1348427873&sr=1-11&keywords=sanding+sleeves

Some times even cheaper on e bay
http://www.ebay.com/itm/Jet-Aluminum-oxide-sanding-sleeves-9-x-1-x-60-Grit-4-pk-spindle-Drum-sander-/190727685386?pt=LH_DefaultDomain_0&hash=item2c6841850a

-- http://artisticwoodstudio.com Custom furniture

View Gshepherd's profile

Gshepherd

1472 posts in 868 days


#4 posted 09-23-2012 07:46 PM

Rembo, It will work, I burned up my 1/4 sleeve and as you know it I did not have a extra so I used the sticky back paper and wrapped it around the steel spindle to get through the project. I did however find it better by using a 1/4 long wooded dowel and sprayed some extra sticky stuff on it then wrapped it with the sticky back. Mine is a Oliver OSS. I can take the spindle shaft off and put a dowl in it and tighten the set screw and good to go, Wood is not as strong as the steel but in a pinch it worked. The darn things are pricey as you say.

Oh forgot, if you do the dowel spindle trick, try using some CA it really sticks, but a real pain getting off. I figured what the heck when I was in a bind, I cut narrow strips then wrapped it.

-- What we do in life will Echo through Eternity........

View Rembo's profile

Rembo

408 posts in 1617 days


#5 posted 09-23-2012 08:10 PM

bush is the biggest we 450rubley. divided by rate (1 dollar is worth about 31 rubles)
in the end I had to pay $ 14 per piece! Gshepherd,glue is not difficult. try.
The complexity of the original disks to make the coil.
Then in a position to supply cheaper than JET, in the U.S. :)

View KnotCurser's profile

KnotCurser

1839 posts in 1735 days


#6 posted 09-23-2012 08:25 PM

Good idea!

If you can, try to see if you can convert it to a hook & loop system. You can then simply buy rolls of paper and have really cheap changes. This also allow really fast paper changes – bonus!

Here’s a link to my Rigid Conversion I did a while ago:

http://lumberjocks.com/projects/42671

Hope this helps!

-bob

-- Robert Rhoades WoodWorks / Email: rrww@rhoadesclan.com / www.rhoadesclan.com

View Rembo's profile

Rembo

408 posts in 1617 days


#7 posted 09-23-2012 08:38 PM

KnotCurser,Thank you. but I want to take advantage of what I bought.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase