Mobile cart for my table saw

  • Advertise with us
Project by lhartmann posted 09-18-2012 03:05 PM 5593 views 6 times favorited 8 comments Add to Favorites Watch

I have a very small garage and am always moving my saws. Finally decided to make up a cart. Found this idea on-line and it works nicely.

8 comments so far

View Dusty56's profile


11822 posts in 3834 days

#1 posted 09-18-2012 03:11 PM

Very Nice and useful project…do you have a link ?
Thank you : )

-- I'm absolutely positive that I couldn't be more uncertain!

View lhartmann's profile


12 posts in 2453 days

#2 posted 09-18-2012 03:19 PM

Here’s the link for it.
Hopefully it works for you.

View Dusty56's profile


11822 posts in 3834 days

#3 posted 09-18-2012 03:29 PM

Yes , it worked fine . Thank you very much , and have a great day : )

-- I'm absolutely positive that I couldn't be more uncertain!

View Dustmite97's profile


439 posts in 3366 days

#4 posted 09-18-2012 07:02 PM

Somebody that has the same saw as me! A mobile base is definitely a great thing to have. Good work on this.

View olddutchman1's profile


69 posts in 2558 days

#5 posted 09-18-2012 11:27 PM

When I seen Your photo, My first thought was,:is that one, post, still up? I have seen that one before, and I almost made one a few years ago! That Mobile looks good to Me. I am disabled, and can not lift any thingt over 15 lbs. so what I like is the tool lift. All of My tools are on wheels, or being prepared for it. My jointer is on wheels in the back, but the front is tust pads. It has a handle that pulls out of the bace, but it’s too heavy for My back. Your post reminded Me that I wanted to make a lift like this. Your Mobile lift will come in very handy for You! Thanks for posting!

-- Saved! and so gratefull.Consider Who Created it All

View GlennsGrandson's profile


443 posts in 2455 days

#6 posted 09-19-2012 02:11 AM

lhartmann and Dustmite97, there are more people than just me that have this same saw! Have either of you guys figured out a good zero clearance insert for that ridiculous opening around the blade? Check out my recent blog about it .

And Ihartmann, I see there is one of the little plastic feet for the legs laying on the mobile base, I happen to be missing one so I had to take one off to make it level, send it my way! JK!

Great build, good to be able to move things!

-- Grant - N Dakota

View redryder's profile


2393 posts in 3248 days

#7 posted 09-19-2012 06:49 AM

A very useful base for moving the TS around I’m sure but I put a metal base with casters around my old Craftsman TS and my feet always wanted to be right where that base was. Every time I used the table saw, I felt off balance and I was leaning uncomfortably toward the saw blade. I never could get used to it. Hope yours works out for you…................

-- mike...............

View JohnnyStrawberry's profile


246 posts in 2464 days

#8 posted 09-19-2012 02:12 PM

They sell something similar to this with Hammer jointers for a few hundred bucks… They are silly.
But you have made a good cart. Thanks for sharing.

-- What are those few hours of mine compared to those decades Mother Nature has put in it!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics