LumberJocks

Ratatouille-project

  • Advertise with us
Project by rkoorman posted 09-13-2012 04:39 PM 2878 views 16 times favorited 19 comments Add to Favorites Watch

LJ’s

I had a whole lot of scraps laying around the shop . I decided to glue-up these pieces and make a big chuck of laminated pieces of wood. Then I used the angle grinder with a SaburrTooth-disc on it the carve out the bowl.

dimensions: 400×400x85mm
finish : 2 layers of oil followed by 2 layers of danish-oil

Thanks for looking

-- http://thewoodworkersattic.blogspot.com/





19 comments so far

View michelletwo's profile

michelletwo

2557 posts in 2382 days


#1 posted 09-13-2012 04:46 PM

I thought it was an off center turning! Very good use of leftovers, and a nifty project

View TurnTurnTurn's profile

TurnTurnTurn

604 posts in 2476 days


#2 posted 09-13-2012 05:12 PM

Very cool. It could be a dual purpose peice, the bottom could be an end grain cutting board.

-- TurnTurnTurn

View Raymond Thomas's profile

Raymond Thomas

180 posts in 1585 days


#3 posted 09-13-2012 06:58 PM

I like it, I like it – when you are through with it send it my way. LOL

-- Raymond, Charlotte, NC -------- Demonstrate the difference!

View BritBoxmaker's profile

BritBoxmaker

4607 posts in 2403 days


#4 posted 09-13-2012 07:24 PM

Now that is nice. The eccentric bump makes it special.

-- Martyn -- Boxologist, Pattern Juggler and Candyman of the visually challenging. http://www.theartofboxes.com

View degoose's profile

degoose

7187 posts in 2721 days


#5 posted 09-13-2012 07:34 PM

Such artistry…!!

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View branch's profile

branch

1107 posts in 2520 days


#6 posted 09-13-2012 08:07 PM

hi very colorful i like it when i first saw it i thought it was turned great work
branch

View redryder's profile

redryder

2394 posts in 2468 days


#7 posted 09-13-2012 10:40 PM

Wow, different. I like this one…...............

-- mike...............

View arkahoot's profile

arkahoot

4 posts in 1448 days


#8 posted 09-14-2012 12:59 AM

Very cool and abstract!

View grosa's profile

grosa

986 posts in 2195 days


#9 posted 09-14-2012 02:28 AM

That’s a cool looking project. Well done.

-- Have a great day.

View Roger's profile

Roger

19455 posts in 2170 days


#10 posted 09-14-2012 02:49 AM

Wowza!

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View Dark_Lightning's profile

Dark_Lightning

2568 posts in 2475 days


#11 posted 09-14-2012 02:59 AM

That is unusual and cool! If I had to do something like that, I would have made an angled piece to attach it to the lathe, and just turned it. But that’s a less imaginative solution, I think.

-- Random Orbital Nailer

View majuvla's profile

majuvla

8129 posts in 2234 days


#12 posted 09-14-2012 04:26 AM

Awsome 3D effect

-- Ivan, Croatia, Wooddicted

View deon's profile

deon

2496 posts in 2392 days


#13 posted 09-14-2012 06:02 AM

Great work!

-- Dreaming patterns

View rkoorman's profile

rkoorman

381 posts in 2191 days


#14 posted 09-14-2012 08:41 AM

Thanks for the comments!!! The bowl is still in the shop but will be sold asap!!

-- http://thewoodworkersattic.blogspot.com/

View Schwieb's profile

Schwieb

1787 posts in 2828 days


#15 posted 09-14-2012 11:31 AM

When I first looked at this I thought you had done it on a lathe and turned it off center. You’re a wood artist Rick. Nice work!

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

showing 1 through 15 of 19 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com