| Project by SirFatty | posted 254 days ago | 842 views | 0 times favorited | 5 comments |  |
 |
Testing the miter capabilities of the new table saw, I decided to put this together instead of just some random test cuts. Plus the frame clamp got used for the first time in (cannot remember how long ago I purchased it).
1/2” birch plywood, 1/8” birch bottom. Pine on the top to hide the ply’s edge.
Not much of a project, but it would be good on the kitchen counter for keys and such.
Thanks for looking!
| Pin It |
5 comments so far
Monte Pittman
home | projects | blog
7064 posts in 507 days
#1 posted 254 days ago
Build it and you will find a use. Good job.
-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability
Joe Lyddon
home | projects | blog
6393 posts in 2221 days
#2 posted 254 days ago
NICE!
You could call it a Small Parts Bin?! LOL
It’s nice to be able to get Something from the testing process isn’t it?
COOL
-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"
AlBCuttnWud
home | projects | blog
295 posts in 858 days
#3 posted 254 days ago
Drop a lid with pin hinges in there and it will come to life.
-- Al, Strike Fighter Town, Virginia
SuburbanDon
home | projects | blog
406 posts in 1162 days
#4 posted 254 days ago
Time to check the lid jig !
-- --- It's the little tools that get you ---
gfadvm
home | projects | blog
6635 posts in 859 days
#5 posted 254 days ago
Looks like your miters are very accurate. Now you just need to make a nice lid and some wooden hinges! :)
-- " I'll try to be nicer, if you'll try to be smarter" gfadvm
Have your say...