|Project by DIYaholic||posted 09-02-2012 03:59 AM||2722 views||8 times favorited||16 comments|
I totally stole this idea from JoeCline!!! (get it, stolen = Hot) I just hope he is OK with that.
There have been a few of these “Oven Pusher/Pullers” recently & I felt it wood be a fitting gift for some good friends. I was going to design (read: over think/engineer) my own, but wanted this completed in less than a year, so I needed to be a copy cat.
I printed the image of Joe’s project and used spray adhesive to attach it to my glued up blank. The blank is two pieces of 1/4” x 2” x 12” red oak, sandwiching a 1/4” x 2” x 12” piece of poplar. I then used my drillpress for the tight inside curves and my little bandsaw for the rest of the cuts. A little time on the OSS and some hand sanding prior to a few coats of paste wax and I have a finished project.
Not really much to look at, but a very useful tool for my “Foodie Friends” (& maybe a home cooked meal for me). Thanks for lookin’ in…...
-- Randy-- I may not be good...but I am slow! If good things come to those who wait.... Why is procrastination a bad thing?