Folding Clamp and Assembly tables

  • Advertise with us
Project by DougN posted 613 days ago 1669 views 5 times favorited 1 comment Add to Favorites Watch

Since I work in a small garage I needed to have folding tables so I can put them away. I found a plan for a folding assembly table (picture 2) and then decided to modify the design to create a clamp table also. The assembly table is nothing more than a base support made of poplar (with piano hinges) and a hollow core door from HD. I also use the table as outfeed for my table saw. The clamp table has the same makeup for the base but the top is made of two pieces of 3/4” birch plywood (from HD). I applied white laminate to the top layer and then attached the Kreg clamp tracks. Both are going to work out great in my small shop.

-- Doug - Montgomery, Tx

1 comment so far

View cutworm's profile


1006 posts in 1299 days

#1 posted 612 days ago

Nice tables. 10-4 on the space issue.

-- "Actions speak louder than words but not nearly as often." - Mark Twain

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase