Pair of Chairs

  • Advertise with us
Project by Jacob posted 08-17-2012 01:37 AM 1276 views 9 times favorited 8 comments Add to Favorites Watch

Finished set of chairs.
Got the plans from

I had seen somewhere I think here on LJ that it was suggested to double up the upper back support so that’s the only real change I made so far.


8 comments so far

View Eric in Florida.'s profile

Eric in Florida.

3750 posts in 2614 days

#1 posted 08-17-2012 02:49 AM

Very nice job Jacob.
Those look about as comfortable as it gets !
The color is very nice too.

-- Nothing is particularly hard if you divide it into small jobs ~ Henry Ford

View je_superfly's profile


74 posts in 1149 days

#2 posted 08-17-2012 02:53 AM

Some of the best adirondacks I’ve ever seen. These are on my list and I hope my execution will be as clean at yours! The curved back rests look amazing.

-- -James, Sumerville SC

View inchanga's profile


117 posts in 1151 days

#3 posted 08-17-2012 04:39 PM

I made a couple of adirondack chairs two years ago. They are very comfortable and I was quite proud of them,
but after looking at yours I feel like using them for firewood and starting again.

-- chris, north wales

View Alongiron's profile


490 posts in 1732 days

#4 posted 08-17-2012 05:23 PM

Awesome…I could take a nap in those!

-- Measure twice and cut once.....Steve Lien

View Jay20650's profile


40 posts in 1730 days

#5 posted 08-17-2012 06:24 PM

I love Jakes Chairs, they are the best adirondack design around in my opinion. I have a pair on my deck that we fight over for sitting rights! Enjoy!

-- Jay,

View hunter71's profile


2424 posts in 2225 days

#6 posted 08-18-2012 11:56 AM

nice job, I love Adirondack styles, everyones.

-- A childs smile is payment enough.

View GregU's profile


16 posts in 1838 days

#7 posted 08-19-2012 03:18 AM

Nice chairs! What did you use for plans?

View kiefer's profile


4120 posts in 1706 days

#8 posted 08-19-2012 02:18 PM

Very nice and comfortable chairs .
The leg and bottom back brace joint looks strong and sets your design apart .
Well done but a little more on the build would be nice ,like dimensions etc.

-- Kiefer 松

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics