Rotary tool cabinet

  • Advertise with us
Project by munja posted 713 days ago 1695 views 4 times favorited 4 comments Add to Favorites Watch


I’ve recently bought a rotary tool, and I decided to make a cabinet for it, got the inspiration from ShopNotes :)

anyway, here it is. I’ve learned alot from this project, also tried doing an edgebanding ond the doors.
This is my first real cabinet construction experience.

finished with linseed oil and boat lacquer (thought I’d give it a try)
Hope you like it

4 comments so far

View jaykaypur's profile


3257 posts in 1007 days

#1 posted 713 days ago

You did a great job on this. Simple, functional and all the parts and pieces in one place. Nice work.

-- Use it up, Wear it out --------------- Make it do, Or do without!

View munja's profile


28 posts in 814 days

#2 posted 713 days ago

tnx jaykaypur, I found a piece of plywood that was stashed away for a long time, measured everything and just started to build, I made the design as I went along

View Sailor's profile


533 posts in 1864 days

#3 posted 712 days ago

Not to bad, I like how the tool hangs there.

Good Job!

-- Dothan, Alabama Check out my woodworking blog! Also my Youtube Channel's Facebook page

View Knothead62's profile


2342 posts in 1560 days

#4 posted 712 days ago

Nice! I’m going to look for an open spot on the wall in the shop.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase