| Project by Chickenfoot | posted 279 days ago | 1208 views | 3 times favorited | 7 comments |  |
 |
For those of you that followed my Blog http://lumberjocks.com/Chickenfoot/blog/30701. These are the first two projects with my New Unisaw. I built the cross cut sled with 7/4 Mahogany and 1/2” Birch ply. I then used that to build my first box. I believe the wood is Walnut and the top was a piece of the pallet that my Unisaw came on… you can see the holes on top where the nails were, thought it was fitting. Thanks for looking.
-- Mark-
| Pin It |
7 comments so far
DIYaholic
home | projects | blog
7242 posts in 840 days
#1 posted 279 days ago
Two very fitting “First” projects. Nicely done. I love the pallet wood for the box!!!
-- Randy-- I may not be good...but I am slow!
Jim Jakosh
home | projects | blog
7238 posts in 1270 days
#2 posted 279 days ago
Nice projects. You’ll love a sled on your table saw!!
-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!!
NormG
home | projects | blog
2541 posts in 1169 days
#3 posted 279 days ago
Both very nice
-- Norman
gfadvm
home | projects | blog
6600 posts in 855 days
#4 posted 279 days ago
Nice (and appropriate) box. I followed your whole trading journey and remain in awe of your ‘horse trading’ skills.
-- " I'll try to be nicer, if you'll try to be smarter" gfadvm
AngieO
home | projects | blog
453 posts in 312 days
#5 posted 278 days ago
Nice! I havent followed your blog… But now I want to go check it out.
And I think it’s great you used wood from the pallet your saw came on. Awesome.
Dusty56
home | projects | blog
10495 posts in 1853 days
#6 posted 278 days ago
Figured Walnut and Poplar …nice box !! Congrats on your new toy and the sled as well : )
-- When did quiet and quite become the same word ? I'm guessing about the same time as your and you're did.
AngieO
home | projects | blog
453 posts in 312 days
#7 posted 278 days ago
Checked out your blog. Great story. Inspiring.
Have your say...