LumberJocks

Miter Saw Station

  • Advertise with us
Project by DougN posted 727 days ago 3601 views 14 times favorited 9 comments Add to Favorites Watch

I finally made the miter saw station that I so desperately needed. I combined plans from two projects – the miter saw station from Plans.Now and the Ultimate Miter Saw Stand from Woodworker’s Journal. I included the sliding base for the saw so that I can line it up with the fence with or without a sacrificial zero clearance fence on the saw. I am also going to put a dedicated vacuum in the lower compartment instead of a scrap bin. This should be a great addition to my workshop!

-- Doug - Montgomery, Tx





9 comments so far

View Ken90712's profile

Ken90712

14821 posts in 1791 days


#1 posted 726 days ago

Looks good from what I can tell. Pics are really small. Nice work

-- Ken, "Everyday above ground is a good day!"

View dakremer's profile

dakremer

2448 posts in 1694 days


#2 posted 726 days ago

great project! I’m just in the process of making a bunch of rolling carts for “my” shop. I say “my” because its actually my brother-in-law’s shop, but he never uses it….so i’m taking over. :)

-- Hey you dang woodchucks, quit chucking my wood!!!!

View oldretiredjim's profile

oldretiredjim

178 posts in 988 days


#3 posted 726 days ago

is there any way to enlarge the pics. i tried to copy and past so i could manipulate them but couldn’t.

View Grumpymike's profile

Grumpymike

1014 posts in 918 days


#4 posted 726 days ago

Jim, try clicking on the thumbnail (small picture) at the right … hope that is what you wanted.

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View Grumpymike's profile

Grumpymike

1014 posts in 918 days


#5 posted 726 days ago

That is one cool Miter saw station. I really like the folding aspect for the smaller shop. good use of valuable space.
Thanks for sharing.

-- Grumpy old guy, and lookin' good Doin' it. ... Surprise Az.

View kajunkraft's profile

kajunkraft

93 posts in 813 days


#6 posted 726 days ago

You chose the Kreg stop-block set up which I have considered as well. I haven’t been able to figure out why there are the two separate stops? If you chose only one, which one would you choose? I have made a couple of versions of this sort of set up but have not yet found one that I really like. Now it’s probably time to try this one. Looks great!

View DougN's profile

DougN

28 posts in 958 days


#7 posted 726 days ago

The two different types of stops allow you to set two lengths and then flip one out of the way for cutting the longer cuts. If I had to limit to one then I would get the flip stop. Good luck building this project. It was a very easy build.

-- Doug - Montgomery, Tx

View workerinwood's profile

workerinwood

2708 posts in 1670 days


#8 posted 725 days ago

Great job!! I built one a year ago and love it, very useful.

-- Jack, Albuquerque

View kajunkraft's profile

kajunkraft

93 posts in 813 days


#9 posted 725 days ago

AHHH now I see. Of course I would get the flip stop. I do a lot of repetitive cuts but there are lots of misc. cuts mixed in. Thanks for pointing this out.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase