LumberJocks

Small 3d Cutting board...

  • Advertise with us
Project by omextreme posted 07-26-2012 01:24 AM 3191 views 7 times favorited 12 comments Add to Favorites Watch

Just another addictive design… Copied from the collective works of some ambitious lumberjocks members.. Took a while for this one with the bulk of the time making jigs and clamping assemblies. Hopefully the next one will go faster. Maple, Cherry, mahogany (wont use the mahogany next time,,, way too open grained). Slightly routed the edges at 22.5 deg to try for a different look then the standard round over or 45 bevel…

Added a picture from further back.





12 comments so far

View JL7's profile

JL7

7483 posts in 1717 days


#1 posted 07-26-2012 01:35 AM

Very nice – That is a (Steve) SPalm design and I’m sure it will illicit alot of attention. Nicely done.

-- Jeff - I have not failed. I've just found 10,002 ways that won't work.

View Dusty56's profile

Dusty56

11686 posts in 2440 days


#2 posted 07-26-2012 02:09 AM

Perhaps you could step back with the camera far enough to show the whole project : )
Nice job on what is shown : )

-- I'm absolutely positive that I couldn't be more uncertain!

View JT23325's profile

JT23325

155 posts in 900 days


#3 posted 07-26-2012 02:22 AM

Simply Awesome. Great board.

-- Jeff, Ability will never catch up with the demand for it. - Malcolm Forbes

View MonteCristo's profile

MonteCristo

2098 posts in 941 days


#4 posted 07-26-2012 02:23 AM

Great 3-D effect !

-- Dwight - "Free legal advice available - contact Dewey, Cheetam & Howe""

View nuttree's profile

nuttree

258 posts in 2076 days


#5 posted 07-26-2012 05:26 AM

I love the pattern and the use of color. It looks like its 6” deep. Nice board.

-- I only went out for a walk and finally concluded to stay out till sundown, for going out, I found, was really going in. -John Muir

View majuvla's profile

majuvla

3926 posts in 1620 days


#6 posted 07-26-2012 09:39 AM

Those 3D patterns are always inspiration

-- Ivan, Croatia, Wooddicted

View Ken90712's profile

Ken90712

15337 posts in 1941 days


#7 posted 07-26-2012 11:34 AM

Well done.

-- Ken, "Everyday above ground is a good day!"

View SPalm's profile

SPalm

4939 posts in 2634 days


#8 posted 07-26-2012 12:05 PM

Well done Sir.
That is not an easy glue-up to do. Also you managed some very precise cutting on that.

Good job,
Steve

-- -- I'm no rocket surgeon

View RetiredCoastie's profile

RetiredCoastie

999 posts in 1935 days


#9 posted 07-26-2012 11:55 PM

Very nicely done. It is an addictive pattern and you have done it well. Titebond Extend makes the glue-up much easier.

-- www.thepatriotwoodworker.com Proud Supporter of Homes For Our Troops

View Dusty56's profile

Dusty56

11686 posts in 2440 days


#10 posted 08-19-2012 09:16 PM

Thanks for adding the second photo…well done : )

-- I'm absolutely positive that I couldn't be more uncertain!

View je_superfly's profile

je_superfly

74 posts in 862 days


#11 posted 08-19-2012 11:23 PM

I’ve been wanting to attempt this design for some time. You executed it flawlessly! Did you follow SPalm’s blog exactly, or come up with any new processes or tricks?

-- -James, Sumerville SC

View omextreme's profile

omextreme

49 posts in 1129 days


#12 posted 08-21-2012 03:52 AM

Followed it pretty spot on. Have some ideas for the next one that may have some modifications. Ill share those if it works!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase