| Project by JT23325 | posted 328 days ago | 704 views | 3 times favorited | 2 comments |  |
 |
This is my version of the traditional wall mounted Coin/Poker chip case, that I made using some old picture frame parts that were collecting dust somewhere in a dark corner of my shop. The pair was made for my brother’s 50th Birthday. I have never been a fan of the “bulky” cases that I have seen everywhere; these are a mere 1 1/2 thick and will hold 55 Poker chips each. The background is Matte board and the finish is 3 coats of lacquer. I chose a top hinge to better conceal it and used rare earth magnets as fasteners at bottom. Hope you enjoy.
-- Jeff, Ability will never catch up with the demand for it. - Malcolm Forbes
| Pin It |
2 comments so far
Ken90712
home | projects | blog
12849 posts in 1385 days
#1 posted 328 days ago
Very cool idea, great gift to boot!
-- Ken, "Everyday above ground is a good day!"
RKaste
home | projects | blog
144 posts in 352 days
#2 posted 328 days ago
Really nice idea. That would be perfect for my challange coins. Thanks for sharing.
-- --May you have fair winds and following seas--
Have your say...