LumberJocks

Credenza

  • Advertise with us
Project by Dan Pleska posted 738 days ago 1107 views 1 time favorited 11 comments Add to Favorites Watch

This credenza style entertainment center was a commission project. It’s all white oak with a golden oak stain and two coats of clear lacquer. The top has three coats. It’s 66” long x 33” high x 20” deep at the top. The only things I didn’t make were the bun feet. I added a fifth foot to support the middle. I turned the column and then cut it in half to make the half columns. The clients last name starts with an “H” hence the walnut monogram above the column. The center doors have smoked glass and the slot in the back is for cords. The drawer glides and the door hinges are soft close.

-- Dan, West Virginia, http://www.danpleskaCreations.com





11 comments so far

View DocSavage45's profile

DocSavage45

4756 posts in 1446 days


#1 posted 738 days ago

Nice craftsmanship. Probably took three guys to move it? LOL! For me everything works but the handles on the drawers? Will be a forever piece for your customers.

-- Cau Haus Designs, Thomas J. Tieffenbacher

View jack1's profile

jack1

1909 posts in 2631 days


#2 posted 738 days ago

Gotta be one of the best projects I’ve seen on this site. Great work.

-- jack -- ...measure once, curse twice!

View TDog's profile

TDog

233 posts in 833 days


#3 posted 738 days ago

Looks great,

especially since it was a commissioned piece…always makes it a little sweeter…

-- "So many projects...so little time..." Psalm 23

View devann's profile

devann

1735 posts in 1296 days


#4 posted 738 days ago

I love it. One of the better looking pieces on the site I’ve seen lately. You did a fine job Dan.

-- Darrell, making more sawdust than I know what to do with

View DocK16's profile

DocK16

1139 posts in 2690 days


#5 posted 737 days ago

Dan,
Very nice work, love the split column look, this design yours?

-- Common sense is so rare anymore when you do see it, it looks like pure genius.

View scarpenter002's profile

scarpenter002

466 posts in 2508 days


#6 posted 737 days ago

Nice job Dan. Thanks for sharing.

-- Scott in Texas

View Dan Pleska's profile

Dan Pleska

138 posts in 2564 days


#7 posted 737 days ago

Thanks for all the comments.

DocK: Pssst, don’t tell anyone, but I made it from a picture from a local high-end furniture store.

-- Dan, West Virginia, http://www.danpleskaCreations.com

View DocK16's profile

DocK16

1139 posts in 2690 days


#8 posted 730 days ago

Definitely high end

-- Common sense is so rare anymore when you do see it, it looks like pure genius.

View Jonnhy_Switch's profile

Jonnhy_Switch

43 posts in 690 days


#9 posted 677 days ago

LOOKS GREAT!

View Bruce's profile

Bruce

187 posts in 2378 days


#10 posted 660 days ago

Hey Dan, NICE PROJECT. Haven’t been on here in a while so a little late to the party…lol. I have a dresser my great grandfather made that has half-columns like that. It’s quite beat up and i hope to refurbish it someday. Its made of cherry & tiger maple drawer fronts a full inch thick! Again, nice work.

-- I think of Jack Nicholson as the Joker in Batman when he says "Where does he get those wonderful toys" and ask WHERE DO U GUYS GET ALL THAT WONDERFUL WOOD?

View a1Jim's profile

a1Jim

112001 posts in 2181 days


#11 posted 660 days ago

This is an amazing piece Dan ,great design and outstanding workmanship.

-- http://artisticwoodstudio.com Custom furniture

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase