LumberJocks

tablesaw extension

  • Advertise with us
Project by ronniebo posted 07-19-2012 12:51 AM 1709 views 1 time favorited 1 comment Add to Favorites Watch
tablesaw extension
tablesaw extension No picture No picture No picture No picture No picture
Zoom Pictures

I`ve tried to upload these fotos elsewhere (another site), but will do so here too.
On my Carbatec tablesaw I needed to add this extension made of kitchen cabinet top scrap (40mm thick melamine on particleboard) to enable me to use my new i-box from Incra.
The existing router extension didn`t have a mitre slot in it so turned out to be useless.
Talking of useless, I managed to put the first slot in the wrong place, hence the second installation.
It all works perfectly now.
The Aluminium bar and angle are 6mm thick and very robust to ensure that the table stays flush with the original table.
Hope this helps someone.
Ron in Hobart





1 comment so far

View ronniebo's profile

ronniebo

126 posts in 2128 days


#1 posted 07-19-2012 12:52 AM

Well that didn`t work out as all you can see is the original tablesaw extension.
I`ll try again.
Ron

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com