LumberJocks

Big 300

  • Advertise with us
Project by Jimboe posted 07-14-2012 05:17 PM 1395 views 6 times favorited 9 comments Add to Favorites Watch

The latest commissioned piece that ive done . Its a 300 chip case with pull out tray. Under the tray is a space to store dice dealer chips and cards. The case is finger jointed with dark american walnut with a beutiful Curly maple lid . The tray is made with the same curly maple and also finger jointed in the corners. Hope ya like





9 comments so far

View RS Woodworks's profile

RS Woodworks

464 posts in 1975 days


#1 posted 07-14-2012 06:14 PM

Very very nice! Whats the dimensions? How did you cut the coves for the chips?

-- I restore the finest vintage tools! If you need a nice plane, saw, marking tool or brace, please let me know!

View bobasaurus's profile

bobasaurus

1386 posts in 1907 days


#2 posted 07-14-2012 06:49 PM

Very nice. How did you sand the chip coves? Seems like that would be a pain by hand. I like the chamfer on the top maple piece.

-- Allen, Colorado

View Jimboe's profile

Jimboe

238 posts in 2473 days


#3 posted 07-14-2012 06:51 PM

its 20×9x4 roughly The coves are 6 5/8 long to fit 50 pro clay poker chips ..I used a 1 5/8 box bit on a jig i made http://lumberjocks.com/projects/52492 <~~ this one to be exact Thanks for looking

View Jimboe's profile

Jimboe

238 posts in 2473 days


#4 posted 07-14-2012 06:56 PM

sanding the coves i use a dowel surrounded with pipe foam isolation ...works pretty good

View gfadvm's profile

gfadvm

11370 posts in 1413 days


#5 posted 07-15-2012 01:32 AM

That is a beautiful chip holder with great combo of woods and flawless craftsmanship.

-- " I'll try to be nicer, if you'll try to be smarter" gfadvm

View Schwieb's profile

Schwieb

1559 posts in 2184 days


#6 posted 07-15-2012 10:22 AM

Beautiful box.

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View juanabee's profile

juanabee

104 posts in 1731 days


#7 posted 07-15-2012 08:56 PM

Jimboe,
Eye-catching, and with elegant simplicity, beautiful lines and tasteful artistry. I’ve never made anything quite at this level, but if I had, I don’t think I could sell it. It would feel too much like giving away one of my children. Inspiring work, thanks for posting.

Juanabee

-- "Life's nonsense pierces us with strange relation." Wallace Stevens

View Richard's profile

Richard

1045 posts in 1414 days


#8 posted 07-18-2012 11:02 PM

Very nice and thanks for posting the link to jig, I saw it before but could not remember where. It is favorited now so I don’t lose it.

View harum's profile

harum

129 posts in 366 days


#9 posted 03-13-2014 03:45 AM

Thank you for sharing the photos; it’s a well done box. It is hard to see from the photos how the top panel is attached to the sides. Is it floating? If yes, how are the grooves cut? Thanks, h.

-- "If you're not counting the ripples when throwing pebbles in the water, you're wasting your time."

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase