| Project by woodworkerscott | posted 317 days ago | 826 views | 0 times favorited | 6 comments |  |
 |
This actually was not planned; it just came about when I was playing around with some scrap wood. I thought this would be a unique design combining the arrow and chevron for a southwest look. I donated this board to a fund raiser and it did quite well. I really wanted to keep it, but it went to a good cause. I can always make me one later. :)
I unfortunately only took one picture.
Made of maple, birch, and walnut. Finished with mineral oil.
Let me know what you think. I might make more. Thanks for viewing.
-- " 'woodworker'.....it's a good word, an honest word." - Sam Maloof
| Pin It |
6 comments so far
woodnutbutter
home | projects | blog
14 posts in 338 days
#1 posted 317 days ago
I have never seen one like this. Pretty cool. Is the design on the back, too?
Dusty56
home | projects | blog
10508 posts in 1855 days
#2 posted 317 days ago
Something different ..I like it : )
-- When did quiet and quite become the same word ? I'm guessing about the same time as your and you're did.
degoose
home | projects | blog
6590 posts in 1521 days
#3 posted 317 days ago
You have impressed me greatly… well done…fun isn’t it…
-- Drink twice... and don't bother to cut... @ larrysworkshop.wordpress.com For lovers of all things timber...
Spoontaneous
home | projects | blog
1014 posts in 1497 days
#4 posted 316 days ago
Good looking board. I like the ‘change of direction’ of the arrow. Nice job!
-- I just got done cutting three boards and all four of them were too short. (true story)
amagineer
home | projects | blog
1015 posts in 764 days
#5 posted 316 days ago
Very nice design. It is fun to see what develops from putting different pieces together.
Don
-- Flaws are only in the eye of the artisan!
woodworkerscott
home | projects | blog
326 posts in 981 days
#6 posted 316 days ago
Thanks guys.
woodnutbutter…the design is on the face only. The back is just regular linear strips of maple. I could of had it shown on both sides but I wanted the board a little thicker than 3/4. This also allowed for there to be a side to cut on and not hurt the design face.
Yes, it is fun!
Thanks for the kind words and thanks for viewing.
-- " 'woodworker'.....it's a good word, an honest word." - Sam Maloof
Have your say...