Candy Dish ?

  • Advertise with us
Project by jaykaypur posted 07-03-2012 01:46 AM 1016 views 0 times favorited 6 comments Add to Favorites Watch

Made out of spalted birch using a belt sander and a dremel tool. Dish is 5’’ x 4’’ and at its tallest is 2’’. The indentation (dish) is 1’’ deep. Finished with butcher block oil, wipe-on poly, and then several coats of sunflower oil. For a piece of scrap, it turned out right nice.

-- Use it up, Wear it out --------------- Make it do, Or do without!

6 comments so far

View jjw5858's profile


1132 posts in 1642 days

#1 posted 07-03-2012 02:04 AM

This is very cool Jay, realy nice finishing as well on this piece.

-- "Always continue to learn, laugh and share!" JJW

View Roger's profile


17667 posts in 1844 days

#2 posted 07-03-2012 02:33 AM

Oh yea. I likes the dish, and I likes me some candy

-- Roger from KY. Work/Play/Travel Safe.

#3 posted 07-03-2012 03:14 AM

Lov that wood nice piece

-- (L an D Woodworks)

View Monte Pittman's profile (online now)

Monte Pittman

17962 posts in 1378 days

#4 posted 07-03-2012 05:13 AM

Nice piece. Good looking wood. I better go OK at the scap pile again.

-- Mother Nature created it, I just assemble it.

View bowtie's profile


913 posts in 1386 days

#5 posted 07-03-2012 09:43 AM

Jay, you’ve made another treasure from scrap with this dish.

-- bowtie,.....jus passin thru....

View lew's profile


10624 posts in 2795 days

#6 posted 07-03-2012 11:50 AM

Very Nice!
It’s amazing what you can find hiding inside a piece if scrap!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics