Outfeed table and work area

  • Advertise with us
Project by usnavyac1 posted 06-29-2012 06:52 PM 4224 views 28 times favorited 21 comments Add to Favorites Watch

A few people asked about my out feed table and workstation so I posted some pictures of it. It is approximately 6’x8’ and made out of some cherry cabinets that i made for another project but did not use. I installed a 50” Beismeyer Fence that I bought at my local tool supplier and my Rigid Table Saw (for now) and I made the table saw section big enough to replace the saw with a cabinet saw later. I have not decided whether or not to put drawers of leave the cabinets open or put doors, which will come later.

Thanks for looking and I hope that answers some of the questions.


21 comments so far

View lumberjoe's profile


2883 posts in 1339 days

#1 posted 06-29-2012 07:03 PM

That’s awesome! I am going to do something very similar but a but longer and a tad narrower. I still don’t understand how your rip fence attaches

-- Unplugged Woodworkers -

View Bearpaw's profile


230 posts in 2811 days

#2 posted 06-29-2012 07:08 PM

Good looking set up. I am retired Navy AE. I flew on P2V-7, C-118 load-master, C9 crew chief. Some of the best days of my life.

-- "When we build, let us think we build forever." John Ruskin

View usnavyac1's profile


20 posts in 1249 days

#3 posted 06-29-2012 07:16 PM

The rip fence is attached to a 1”x5” oak facia that is attaced to the table. The key was lining up the front of the table saw and the facia so the fence would line up and fit flush all the was across.

View lumberjoe's profile


2883 posts in 1339 days

#4 posted 06-29-2012 07:21 PM

I see that part, and you did an awesome job! How does it attach in the back?

-- Unplugged Woodworkers -

View DanW's profile


118 posts in 2133 days

#5 posted 06-29-2012 08:04 PM

Sweet! I have been needing to do something like this for a loooooooong time. I’ve got an old (50’s) Craftsman contractor that grandpa had and I added a 50” rail & t-square fence (Shop Fox) but, I haven’t really taken the time to make a really “good” station for the saw. This gives me some good ideas…..thanks for sharing.

-- "Let he who does not work in wood, find something else that's half as good." (can't remember who I'm quoting)

View usnavyac1's profile


20 posts in 1249 days

#6 posted 06-29-2012 10:03 PM

The Beismeyer fence does not require a back rail. It fits tight to the table by locking to the front rail. This is really a great fence system and I would recommend it to anyone who is looking for an accurate fence for a resonable price.

View Dusty56's profile


11781 posts in 2778 days

#7 posted 06-30-2012 01:10 AM

I found it !! Nice set-up …wish I had that much space : )

-- I'm absolutely positive that I couldn't be more uncertain!

View SirFatty's profile


510 posts in 1302 days

#8 posted 06-30-2012 01:31 AM

Nice work! Welcome to LJs also!

-- Visit my blog at

View bake's profile


384 posts in 2768 days

#9 posted 06-30-2012 01:44 AM

That is one of the best setups I have seen. Great job.

-- I love the smell of Home Depot in the morning, it smells like.......carpentry. Bake, Bar Lazy U Woodworks, Lehi,UT.

View Steve187's profile


34 posts in 1418 days

#10 posted 06-30-2012 03:59 AM

Nice setup you have there. Welcome to LJs!

-- Steve (North Louisiana, near Ruston)

View 559dustdesigns's profile


633 posts in 2258 days

#11 posted 06-30-2012 04:44 AM

This is the way to build an out feed table saw bench. Thanks for sharing this project

-- Aaron - central California "If you haven't got the time to do it right, when will you find the time to do it over?"

View a1Jim's profile


113833 posts in 2667 days

#12 posted 06-30-2012 05:27 AM

Now that looks very slick,boy will that make things easier.super job.

-- Custom furniture

View redryder's profile


2340 posts in 2192 days

#13 posted 06-30-2012 05:42 AM

That’s a whole lotta work space. Your saw should feel spoiled with all that around it. Love the top…..........

-- mike...............

View 308Gap's profile


335 posts in 2093 days

#14 posted 06-30-2012 05:48 AM

You could land a cessna on that. Looks great.

-- Thank You Veterans!

View Timthemailman's profile


307 posts in 1867 days

#15 posted 06-30-2012 07:04 AM

Nice design, great job

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics