| Project by Chris Davis | posted 450 days ago | 432 views | 0 times favorited | 7 comments |  |
 |
This in a Murphy bed that I call the Bullock. I build the top of each door panel with either an arch or just straight across, like this one. This was completed on April 4, 2008. It is built from oak wood and has standard crown and base molding that I use on most of the Bullocks that I build.
One thing that I did different on this was to add some mid-molding. This was an off the shelf base cap molding that resembles a smaller version of chair rail molding. For the picture I just attached it with two-faced tape. The customer will fit it themselves when they install it. It will be going between two window frames and will have to be coped, the same with the crown.
I’ve been working on getting this system the way that I want it for about 10 months. see our “Current Projects” page for a live shot. It will be the previous days video if the shop is not open.
-- Watch live video from our shop. http://wwbeds.com/live.htm
7 comments so far
Scott Bryan
home | projects | blog
16272 posts in 573 days
posted 450 days ago
Hi Chris,
This is another nice bed. You really do a gorgeous job on these. I can see why they are popular.
I like the live feed too. It is a nice touch for current and potential customers to be able to tune in and see what is going on there.
Thanks for the post.
-- With God's help all things are possible- even woodworking. Woodworking is not just a hobby, it is an (expletive deleted) expensive hobby.
tenontim
home | projects | blog
1230 posts in 496 days
posted 450 days ago
That’s a very nice design. It doesn’t even look like a Murphy bed.
-- Tim -- http://tmuli.com
pashley
home | projects | blog
448 posts in 469 days
posted 450 days ago
Very well done, sir.
-- http://newmissionworkshop.com
Mario
home | projects | blog
824 posts in 803 days
posted 450 days ago
Very nice and i like the live cam setup also.
Thanks for the posts.
-- Hope Never fails
GaryK
home | projects | blog
9429 posts in 740 days
posted 449 days ago
Very nice bed and cabinet to put it in.
-- Gary, East TX -- The longest journey begins with a single step.
ND2ELK
home | projects | blog
5053 posts in 525 days
posted 449 days ago
Great looking bed as always. I like the break up in the middle. Thanks for posting.
God Bless
tom
-- Mc Bridge Cabinets, Iowa
ejv
home | projects | blog
25 posts in 435 days
posted 434 days ago
Very, very nice. You are doing some fine work, Chris.
-- Eric - Nashville, Tennessee