New wooden vases

  • Advertise with us
Project by Diggerjacks posted 06-27-2012 04:54 PM 1606 views 2 times favorited 12 comments Add to Favorites Watch


Here are my two last wooden vases and on the right a piece for a future project ( a ring holder probably or ........ my mind is in reflexion ….. Wait and see ….....)

A lot of pleasure to make this three pieces with my lathe

I like this technique inside out turning

I have some ideas for another project but ….......... Wait and see …..........

Comments welcome

Thanks for looking

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

12 comments so far

View Bricofleur's profile


1296 posts in 2281 days

#1 posted 06-27-2012 05:01 PM

Now we know: Practice makes perfect! Thanks for sharing, Jack. Nice work, again.



-- Learn from yesterday, work today and enjoy success tomorrow. --

View Tom Godfrey's profile

Tom Godfrey

487 posts in 1264 days

#2 posted 06-27-2012 05:36 PM

When I first saw the small picture I was thinking someone has made a big size of an old fashion clothes hanger. What a surprised to find out I was wrong. That’s some nice work and its something I know nothing about. I am not that good at the standard turning..

-- Tom Godfrey Landrum South Carolina (

View kiefer's profile


4218 posts in 1755 days

#3 posted 06-27-2012 11:46 PM

Very nice turning idea and presentation .
I am waiting for the next surprise Jack.

-- Kiefer 松

View Jim Jakosh's profile

Jim Jakosh

14379 posts in 2194 days

#4 posted 06-28-2012 01:17 AM

Those are real eye catchers!! what do you mean about inside out turning? What is that?

thanks, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Roger's profile


17850 posts in 1892 days

#5 posted 06-28-2012 01:37 AM

These are way kool Jacques.

-- Roger from KY. Work/Play/Travel Safe.

View ShopTinker's profile


884 posts in 1857 days

#6 posted 06-28-2012 02:33 AM

When I first saw these I guessed that you turned them as cylinders and then cut out the pattern on the bandsaw. I’m glad you told us how you did it. Inside out turning makes a lot more sense.

Nice job.

-- Dan - Valparaiso, Indiana, "A smart man changes his mind, a fool never does."

View a1Jim's profile


113823 posts in 2665 days

#7 posted 06-28-2012 04:01 AM

Very cool design and build.

-- Custom furniture

View Ken90712's profile


16034 posts in 2277 days

#8 posted 06-28-2012 09:44 AM

Thise are different and really cool. Great work.

-- Ken, "Everyday above ground is a good day!"

View tyskkvinna's profile


1310 posts in 2074 days

#9 posted 06-28-2012 12:59 PM

This is super cool. I want to try this now! How on earth do you stabilise it after you’ve turned it inside out?

-- Lis - Michigan - -

View helluvawreck's profile


19499 posts in 1955 days

#10 posted 06-28-2012 01:04 PM

These are really nice and are something that is a little different. I like them.


-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Diggerjacks's profile


1930 posts in 2227 days

#11 posted 06-28-2012 05:20 PM

Hello to all

Thanks for the comments

I will post a blog with explications next week

To Shoptinker : I use only a lathe and not my bandsaw Wait and see for the process ….

To Jim : Inside out turning : I turn the inside part and the outside part ….

Thanks for looking and for the king words

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Jim Finn's profile

Jim Finn

2011 posts in 2010 days

#12 posted 06-28-2012 08:34 PM

I also thought they were clothes pins. About 1/2” diameter. A few questions: What are the dimensions? What kind of wood?

-- "Just my opinion, I may be right"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics