or Join Now!
Added some copper wire as an inlay. Thought it went well with the colors.
-- -Chris, Pennsylvania, www.facebook.com/millaywoodworks
home | projects | blog
62 posts in 1737 days
Preview this project card
1365 posts in 2196 days
#1 posted 06-22-2012 03:57 PM
Looks great. I tried super-gluing brass wire onto an Elm bowl during the week but had no joy.The glue just seemed to soak into the wood before it held any wire.I’m going to try spotting glue around the groove and letting it harden for a whilebefore I take another shot at it.
I’m interested in hearing what way you did it.
-- A family man has photos in his wallet where his money used to be.
#2 posted 06-22-2012 04:48 PM
Murch- Thanks for the compliment! I originally ran into the same issue as you did while trying to apply the wire. I ended up getting a CA with a thicker viscocity and clamped the wire around the entire bowl with spring clamps and using wax paper to protect the clamps from the glue. It took a little while to finally dry (amazing how fast it will cause your fingers to stick together though!). When it finally did, I sanded it on the lathe. Just be careful sanding!.... Do it at a slowww speed, as the CA with break loose with too much heat!
#3 posted 06-22-2012 08:58 PM
Thanks for the reply. I have a few spring clamps lying around that might prove useful here.
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics