| Project by jfreak53 | posted 330 days ago | 790 views | 0 times favorited | 4 comments | ![]() |
![]() |
Made this little bench out of Mahogany for at the end of our bend back in Jul. of 2011. Made entirely out of Mahogany and I used the left over wood from the table that I made for my parent’s place to make the two legs. You couldn’t tell from the beginning but that wood was beautiful once planed!
The original wood was a rustic bunch that was very weathered up at a friends place a few hour’s from here. Once done planing and sanding and it turned out awesome. The leg’s are 4” thick by 1’ wide and the seat is 3” x 1’. Double screwed and glued and this bench is never falling apart.
| Pin It |




























4 comments so far
BarbS
home | projects | blog
2181 posts in 2250 days
#1 posted 330 days ago
Beautiful! I’ll bet it’s heavy to move. A very fine bench.
-- http://barbsid.blogspot.com/
jfreak53
home | projects | blog
13 posts in 330 days
#2 posted 330 days ago
Very heavy :) Thanks!
The Head Charles
home | projects | blog
767 posts in 1338 days
#3 posted 329 days ago
That bench is stout.
-- Tim- http://www.asliceofwoodworkshop.com; Twitter-@asliceofwood; Facebook-http://www.facebook.com/asliceofwood
helluvawreck
home | projects | blog
10333 posts in 1031 days
#4 posted 329 days ago
Your bench is nice. You did a good job on it.
helluvawreck
https://woodworkingexpo.wordpress.com
-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau
Have your say...