| Project by Schimmel | posted 334 days ago | 1441 views | 2 times favorited | 4 comments |  |
 |
This is my new table saw sled. Built like many on here and YouTube. I used hard maple for the runners, 1/2 plywood for the base and laminated 3/4 plywood for the rails. I wanted it to be strong and straight on the ends so I thought that would help. I did as recommended by many of you and champhered the edges. Sled come out great and I did not even have to make any adjustments it was “perfect”.
-- Chad, Gilbert AZ www.impeccablepen.com
| Pin It |
4 comments so far
eddy
home | projects | blog
885 posts in 1531 days
#1 posted 334 days ago
watch out sleds can be addicting i have 3
-- self proclaimed copycat
cutworm
home | projects | blog
684 posts in 960 days
#2 posted 333 days ago
Nice. You have inspired me to get off my rump and make one. All plywood is nice. What are the dimensions?
-- "Actions speak louder than words but not nearly as often." - Mark Twain
NormG
home | projects | blog
2570 posts in 1171 days
#3 posted 332 days ago
Ohhhhhhhhh, nice sled, I really need to make on myself, thanks for sharing
-- Norman
JK0702
home | projects | blog
45 posts in 298 days
#4 posted 295 days ago
You have inspired me, too. One question, how did you fit it to your T-Slots?? Thanks!
-- John - Huntington Beach CA
Have your say...