| Project by Chris Davis | posted 339 days ago | 1102 views | 1 time favorited | 5 comments |  |
 |
These are 4 tables that were built alone with the one Conference table. The Break Room tables were 96” x 40”. The tops were 1 1/2” thick, edge in maple and covered with laminate.
The laminate is Wilsonart Mountain Passage.
I made the base a little different then on the Conference table. Instead of using a raised panel, I just framed it out with some molding. Can you tell the difference? I like it just as well. We completed these in May 2012
Here are some building pictures:
-- Watch live video from our shop. http://wwbeds.com/live.htm
| Pin It |
5 comments so far
Chris Davis
home | projects | blog
1249 posts in 2149 days
#1 posted 339 days ago
Here is the other table that went with it.
-- Watch live video from our shop. http://wwbeds.com/live.htm
Lee A. Jesberger
home | projects | blog
6489 posts in 2146 days
#2 posted 339 days ago
They look real good, Chris.
Lee
-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com
Jamie Speirs
home | projects | blog
3670 posts in 1023 days
#3 posted 339 days ago
They look great.
I would imagine quite heavy as well.
We have one supplier of Formica/Laminate in Scotland
and they are a 4 hour drive away. :(
jamie
-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe
Chris Davis
home | projects | blog
1249 posts in 2149 days
#4 posted 339 days ago
Very heavy! Just the top was almost two full sheets of plywood. It is not built up on the edges either, full 1 1/2”. I thought about using MDF. Glad I didn’t.
-- Watch live video from our shop. http://wwbeds.com/live.htm
Roger
home | projects | blog
9191 posts in 971 days
#5 posted 339 days ago
Super
-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net
Have your say...