• Advertise with us
Project by Callum Kendall posted 04-06-2008 09:51 PM 1742 views 0 times favorited 6 comments Add to Favorites Watch

Another project from my course, again this project took a few hours but I think it turned out well.

Thanks for looking


-- For wood working podcasts with a twist check out

6 comments so far

View teenagewoodworker's profile


2727 posts in 2860 days

#1 posted 04-06-2008 10:05 PM

nice job. from what I’ve heard cups are pretty hard to do because one slip could either puncture the side or cut the stem off. its the same with vases. a couple hours work can be ruined in a few minutes. great job on this though. turning is such a great thing to know. looking forward to some more posts.

View Scott Bryan's profile

Scott Bryan

27251 posts in 2914 days

#2 posted 04-07-2008 04:08 AM


This is a nice turning. You are obviously enjoying using the lathe, as you should.

Thanks for the post.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View cajunpen's profile


14538 posts in 3158 days

#3 posted 04-07-2008 07:01 AM

Good looking goblet. I think that you did a good job on it, but in the line of constructive advice, I’d try to get a little thinner walls on the next one – which I guess would be the natural progression in the learning curve :-)).

-- Bill - "Suit yourself and let the rest be pleased."

View matt garcia's profile

matt garcia

1853 posts in 2764 days

#4 posted 07-02-2008 02:50 AM

You’re Sir Knight Callum of Camelot, and you’ve found the Holy Grail!!! Great job!!

-- Matt Garcia Wannabe Period Furniture Maker, Houston TX

View Dusty56's profile


11781 posts in 2780 days

#5 posted 07-08-2008 06:35 AM


-- I'm absolutely positive that I couldn't be more uncertain!

View Grumpy's profile


20737 posts in 2943 days

#6 posted 07-09-2008 12:26 AM

Callum, great job. I agree with Bill, the thinner walls will make it a very nice piece.

-- Grumpy - "Always look on the bright side of life"- Monty Python

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics