|Project by Greg, B.||posted 06-11-2012 06:10 PM||43772 views||11 times favorited||2 comments|
Here are some Alabama corn hole boards that I made for my brother who lives in Alabama. This set was a whole lot easier to make since I used the Kreg Pocket Hole Jig. No more wood putty for me.
I used my 3/4 hp Ryobi router on the edges of the boards. I used a 3/8 round over bit. These boards are hand painted and poly. I made the stencil at work out of 22ga stainless steel. Used the water jet to cut it out. I also made a stencil to go around the hole in the board. It is made out of stainless also. I line up the I.D with the whole in the board and then just go around with the xacto knife.
For those that do not know: The corn hole game gets the name from the corn kernels that are used in the bags that you throw towards the hole in the boards. There are two boards that are set up across from each other and you score points by getting a bag on the board or into the hole. First one to 21 wins the game.