|Project by Nate Meadows||posted 06-08-2012 12:15 PM||1593 views||2 times favorited||29 comments|
So since I have been working on my floor in my shop I have been spending an unfair amount of time out there. I still need to finish my beautiful wife’s glass shop. It used to be a tack room but we insulated it, sanded down the rough cut 2.5in Pine floor and sheet rocked the whole thing. I then built cabinets for it out of Birch Ply and Alder, laid a tile counter with a Shell tile top and a Black Granite apron. I made a torsion box layout table with a cork tile top and a Bubinga front. The drawers are not finished, nor are a million small other details,so I have not yet posted pictures.
Like I said, there are lots of little things to do, like finishing these jack plates. I made this one from Curly Maple, Bubinga and a stylish black plate from Home Depot. I finished it with three coats of Polyurethane. I need to be better about splitting up my time. It will keep me out of trouble:). Unfortunately, I dropped this one as I was putting it in so there is a nice ding in it already:(. Hopefully she will not notice:).
-- "With a little bit of faith, and some imagination, you can build anything!" Nate