| Project by chadgr | posted 350 days ago | 651 views | 1 time favorited | 4 comments |  |
 |
I made this project by accident, it started with an end-grain cutting board made from walnut and oak (I will be posting this soon) I made the oak boards longer than the walnut by about 3 inches, i made the cutting board and at the end I had these scraps left over they were already glued up and ready to go. So i sanded them and gave 2 spray coats of lacquer with light sanding in between.
By Chad Aged 14
-- "There are 4 ways to make a piece of lumber into a wood object, the right way, the wrong way, the woodworking way and my way." Johnny W Morlan
| Pin It |
4 comments so far
DaddyZ
home | projects | blog
2008 posts in 1211 days
#1 posted 350 days ago
Always a fresh new look on things !!
-- Pat - Worker of Wood, Collector of Tools, Father of one
Monte Pittman
home | projects | blog
7070 posts in 509 days
#2 posted 350 days ago
Shows you’re thinking. Better than wasting.
-- Mother Nature created it, I just assemble it. - It's not ability that we often lack, but the patience to use our ability
a1Jim
home | projects | blog
87269 posts in 1748 days
#3 posted 350 days ago
Non scrap,scrap and creative thinking.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Bearpie
home | projects | blog
2475 posts in 1189 days
#4 posted 350 days ago
It’s called utilizing everything! Creative use for scrap except it’s no longer scrap.
-- Erwin, Jacksonville, FL
Have your say...