Converted Coat Closet to Built-In Entertainment Center

  • Advertise with us
Project by Siegel_KenEvil posted 06-06-2012 12:31 AM 3343 views 1 time favorited 3 comments Add to Favorites Watch

This is my converted coat closet. There side panels are held in place with magnets, similar to cabinet speaker covers, and are removable to allow access to 4” cavities on the sides where the wires are routed. The top panel is also removable to reveal a larger cavity where I have a powered antenna. A motion sensor controls three led strips; one in the top panel, one under the upper cabinet, and one in the lower cabinet. The lower cabinet has an exhaust fan controlled with a temperature sensor. The stacked components in the lower cabinet are on a panel mounted on bottom mount drawer slides for easy access to the wire connections. The toe kick/lower drawer is a separate piece on casters. On the right side is a custom panel that with the following modules: Cat5 Internet Access, VGA to TV, stereo to TV, RCA to TV, HDMI to TV, and a 5V USB charger.

-- Scott

3 comments so far

View waho6o9's profile


8474 posts in 2746 days

#1 posted 06-06-2012 12:34 AM

The perforated panels look outstanding, good job Scott.

View DouginVa's profile


490 posts in 2443 days

#2 posted 06-06-2012 01:08 AM

Looks like it belongs in an executive office. Good work.

-- Just a man with his chisel.........

View Ken90712's profile


17592 posts in 3358 days

#3 posted 06-06-2012 04:47 PM

Well done, looks great!

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics