| Project by IndianaJohn | posted 352 days ago | 740 views | 1 time favorited | 4 comments |  |
 |
I built this table as a wedding gift. It was built from a plan I purchased on the internet.
It is all Walnut and finished with satin varnish. The top is attached with four figure 8 fasteners, but all the rest is mortise and tenon joinery. There was a knot on the top that fell out. Instead of trying to match the color of the walnut, I filled it with a plug and black (dyed) epoxy. I think it came out looking pretty good.
| Pin It |
4 comments so far
usnret
home | projects | blog
185 posts in 677 days
#1 posted 352 days ago
NIce looking table, I just poste dthe same table I made from madrone.
-- Chief Petty Officer USN(RET) 1991-2011
rdjack21
home | projects | blog
254 posts in 1096 days
#2 posted 352 days ago
I really like that table and I have to say the wood is beautiful and what knot hole I don’t see it. Also where did you get the plans?
-- --- Richard Jackson
amagineer
home | projects | blog
1018 posts in 766 days
#3 posted 351 days ago
Very nice design. The walnut grain is wonderful.
-- Flaws are only in the eye of the artisan!
nomercadies
home | projects | blog
390 posts in 507 days
#4 posted 351 days ago
The grain is beautiful.
-- Chance Four "Not Just a Second Chance"
Have your say...