|Project by Jeffery Mullen||posted 05-28-2012 05:04 AM||1796 views||9 times favorited||15 comments|
My wife needed something solid to put her soap on in the bathroom so I took a 2×4 and cut 3inches of the end of it and then ran it through my router table to put a round edge on all 4 corners top and bottom, then I ran it threw my table saw to get this result. I came up with this design on my own. I made it to have 4 legs to stand on and the soap block is one solid piece with no screws or glue. It is kinda neat when one wants to get creative and carve out a block of wood with a table saw and end up with something nice to use in the house. This soap block has been used by us for over a month and no splits from the soap or water run off. this block is made of a pine board.
thanks for looking .